Beyond The kWh: Factors That Bitcoin Miners Need To Consider
The vast bulk of the time miners will pick to run their machines in regular mode, which most closely provides the TH listed on the machine at the mentioned wattage. The middle of the pack, the M30S+ machines, reveal performance gains that fall straight in the middle of the lower end M30S machines and the leading end M30S++ makers. We assert that running makers in low mode is the finest alternative to reduce this risk and continue with an extensive analysis on a per-machine level to much better understand what the nominal terahash losses are, versus performance gains measured in watts per terahash.We found that the highest tier Whatsminer M30S++ makers show extremely stable operation throughout various modes, while the greater terahash M30S devices (92T) demonstrate the greatest watt per terahash effectiveness gain when switched to low mode.
The large bulk of the time miners will pick to run their makers in normal mode, which most carefully delivers the TH noted on the device at the stated wattage. Throughout times of high heat it becomes preferable to run your makers in low mode, which, by reducing the effective wattage of the maker, provides an additional ambient temperature level buffer to the hash boards. On the other end of the spectrum, the M30S machines, particularly the 92T ranked M30S makers, show a substantial non-linear variation in hash and wattage when changed from normal to low mode. The middle of the pack, the M30S+ makers, reveal performance gains that fall straight in the middle of the lower end M30S machines and the leading end M30S++ machines. We assert that running makers in low mode is the best option to mitigate this danger and continue with a thorough analysis on a per-machine level to better understand what the nominal terahash losses are, versus performance gains measured in watts per terahash.We found that the greatest tier Whatsminer M30S++ machines show extremely stable operation across various modes, while the higher terahash M30S makers (92T) show the highest watt per terahash efficiency gain when changed to low mode.